GabiJack.com

Archive for the ‘Learning Resources’ Category

Hey guys,

I’m working on a little tutorial I promised to one of you and I hope I can get it ready this same week, but in the mean time, go check out this great YouTube channel that is full of awesome little videos on all kinds of topics about SolidWorks, Simulation, SolidWorks MotionManager, etc. The videos have been produced by GoEngineer, a very fine SolidWorks VAR and are really worth looking at. I just checked them out myself.

So follow this link to their YouTube channel and, if you like what you see, subscribe to it, so you won’t miss any new video and information they may add: http://www.youtube.com/goengineer

Hi everyone! I’ve been keeping a close eye on the site statistics, to try and figure out if my latest “experiment” had any future at all. I’m happy to see that several people  have already downloaded the pdf file and examples on easy surfacing techniques that I put up  a few days ago. I haven’t heard any feedback from those that downloaded, but I  hope they did find the information useful! 

In the past, several readers had already asked me if I could provide more detail than that allowed by a blog post’s size and format. Many people have been asking for step-by-step procedures and formal tutorials with example files included. I had shied away from attempting that approach, however, because I didn’t want to seem pompous, you know, like I was pretending to be what I’m not: and expert telling others what to do or how to do it right.  I am no expert! Then again, if you think about it, nobody can really claim to be an expert in anything. We are all learning here and whoever thinks he/she knows everything there is to know is foolishly wasting away a great opportunity for growth.

Anyway, philosophical views aside, last Tuesday, while I was at the SWUGN Summit, getting ready to do my presentation and talking with other SolidWorks users, I realized that most people are actually very open to the idea of other users sharing useful information with them. They don’t see you as pompous if you do. If you have anything useful to contribute, they’ll be happy to take it. And a lot of users, especially those that are in great need of learning fast,  really dig tutorials and step by step examples. So, with that in mind, I added a page called Downloads and uploaded thee  my first tutorial in pdf format. I hope to add more tutorials and files with time, always free, of course, and the best thing is that they can be about just pretty much anything that comes to mind, even if it’s not something I’m learning right at this moment, and they can be as short or long as needed. This, of course, doesn’t mean that I won’t continue to blog about what I’m doing or learning right now. I always blog as I go, you know that.

So, what do you think of that? I would like to see some comments. Do you think it’s a good idea? What kind of things would you like to see there?  Where are you, people? How come lately I get more comments from my regular spammers than I do from my regular readers? LOL

There’s also a couple more things I wanted to mention for those of you looking for more information and learning resources right now.   First of all… For the very beginners, my fellow blogger and friend, Alex Ruiz, has just come up with a really nice book  “SolidWorks 2010: No Experience Required“.  I actually had the pleasure to work with him and help him complete three of the chapters for the book. It was a great experience, but no, I don’t get comissions or royalties, so don’t think I have a secret agenda.  This is a very nice book for the beginner user and student and Alex put his heart and soul into this volume; he even prepared materials for teachers and a companion website to provide the readers with help and more content. Check it out!

This is also the time of the year when all sorts of learning resources become available. If you are going to buy, take advantage of the offers. For instance, with the coupon code SWFUND10launch you can receive a $20 off  your purchase of the SolidWorks 2010 training from Inspirtech. I checked out what’s new and improved in their materials and I must say I was very impressed. Among other things you’ll find that now you can access the training from the Task Pane, plus  plenty of review exercises and questions to test your knowledge. Again, I’m not getting any commission or payment for passing this info to you.

For those looking into learning more complex stuff, such as surfacing, for instance, IGetIt  has just released some new courses. I’m just telling you this because I got a newsletter from them not so long ago.  I don’t have a coupon code for this one, though, but I’m sure they may be having some sort of offer going on, so why not ask?  Also check out the video lessons offered by Solid Professor and Matt Lombard’s series of books on SolidWorks.

There’s actually so much out there about SolidWorks, I could never list it all here. Please, feel free to add to the list if you know any other good books, websites, videos, etc. And, please, keep those comments coming!

Bloggers don’t blog?  Sorry guys!  I was dealing with quite a few health issues and going through a lot of antibiotics as part of a trial and error strategycareful scientific methodology and thoughtful planning devised my doctor, and all because I’m allergic to Penicillin. But I’m finally feeling better and back with some goodies that, I hope, many of you will find useful.

First of all, let me tell you about the SWUGN San Jose Technical Summit that took place just yesterday, March 23rd, in the city of Milpitas, CA.  As I mentioned before in a previous post, I was there to present about Easy Surfacing Techniques for Solid Models. I was extremely nervous because this was actually my first time presenting for the SolidWorks community… well, OK,  my first time presenting anything for anybody since my last year of college, back in 1996. Yes, I know… 1996… I’m old.  So what?

I was fortunate to find quite a few familiar faces at the event: Richard Doyle,  Alex Ruiz (SWGeek), Matt Lorono (fcsuper and SolidWorks Legion), Phil Sluder, Brian Titus, Kenneth Barrentine, Elise Moss, and a few other people that I’m absolutely sure I’ve seen at SolidWorks World before.  Richard, Alex, Matt and Elise were presenting too, but I couldn’t stay and attend their presentations because I had to run back home to be with my younger son and allow my husband to go back to work. See, my husband selflessly sacrificed his morning to allow me to be at the summit long enough to present, but I couldn’t ask him to sacrifice his whole work day.

Anyway, at least, the time I was there was lived to the max. Despite the butterflies in my stomach, my presentation went a lot better than I had expected. In fact, quite a few people told me that  it actually went great!  And all those things I had worried for days (finishing too soon, making lots of mistakes, presenting for an empty room,  forgetting everything, having an accident in the freeway, wearing my clothes inside out) never actually came true.  This may seem silly to some, but it was a great victory for me. As I left the building, I felt so happy I was practically doing the jig on the way to my car. I just hope nobody saw me.

And now to the goodies. Because I promised it to the people in attendance, I have prepared a pdf document with step by step tutorials of each and every single one of the eight examples I showed yesterday at the summit. It’s 38 pages long and loaded with illustrations. I’m making that available here, together with all the parts and assemblies used in the examples, plus the solved examples to compare.  To download them, just follow the links.

Easy Surfacing Techniques for Solid Models

Example files

Example files (Solved)

I’m thinking I may as well start a new page to list downloads. Writing those tutorials was a fun experience, since I was able to include more detail than I usually do in a blog post, so I may be creating and adding more of those in the future.

I’m really excited about a great new resource available to all those engineers, scientists, students, and enthusiasts out there that perhaps never got exposed to CNC machining while in their college years (like yours truly) and/or that wish to learn the basics on how to program and operate a Computer Numerical Control (CNC) milling machine.  It is a book  -actually  it’s a complete course with curriculum available for educators-  written by Charles Davis, General Manager at NEXGEN Manufacturing Systems, Inc., and is available at www. cncforengineers.com. 

On the website, you will also find information about upcoming training (4 day hands-on classes with limited enrollment offered at various locations around the country), on-site training, and educators can request information on curriculum, videos, lesson plans and PowerPoint presentations available to them, and/or how to sponsor training at their school. BTW, this book is already being used at the Massachusetts Institute of Technology (MIT). It was recently displayed at the ITEA (International Technology Education Association) Conference and received a very positive response from technical educators from around the U.S., and, although it is not exclusive of any particular kind of CAM/CAD software application,  SolidWorks 2009 files are available for completing the exercises (parasolid files also available), and is also being displayed by DS SolidWorks at all educational tradeshows.

While the book is no substitute for hands-on experience and won’t turn you into an expert machinist, it provides an excellent foundation, and is especially useful for those of us that desire to understand the CNC processes; what is doable, what goes beyond its limits, what would be too expensive to machine, what changes could be made to our design to improve its manufacturability and decrease cost, etc. Even if we never have to actually program and run a CNC machine ourselves, having some understanding of all this can greatly improve our designs.

I got my copy of this book a few days ago and I’m already reading. I plan to complement what I learn from it with a few classes at DeAnza or some other institution this fall (hopefully I’ll have reliable childcare by then). So far, it looks like an excellent book, but don’t take it from me, go and check it out yourself!

OK, this is not a commercial and I’m not getting a commission to tell you this, but I thought I would pass along this information to whoever is interested. If you are looking to buy the new student edition of SolidWorks 2008-2009, you may consider taking a look at what Novedge has for sale right now. There are great offers on educational bundles that include a copy of Inspirtech’s SolidWorks 2008-2009 Fundamentals training DVD. So, if you are interested, go check it out at Novedge and take advantage of this offer before it expires.